Fi-Shock XP-2 Series Electric Fence Chargers/Energizers
The Fi-Shock Professional-Series XP-2 / XP-5 Fence Charger systems are designed for the serious farmer/rancher who demands the best in fence charger systems. Both Fi-Shock charger systems provide the same features except for their fence charging capacities. The Fi-Shock XP-2 charger system is capable of charging up to 30 miles of fence wire while the Fi-Shock XP-5 charger system is capable of charging up to 75 miles of fence wire.
- XP-2 charges up to 30 miles, XP-5 charges up to 75 miles
- XP-2 charges to 2 Joules while the XP-5 charges up to 5 Joules
- Low impedance
- Shocks through weeds and grass
- Built in surge/lightning protection
- Two outputs, one for full power fence and one for reduced power fence (both can be used simultaneously)
- Full powered output for maximum fence length
- Reduced power output for smaller lengths (ideal for paddock, cow trainers, etc.)
- Indicator lights for control board/power input and power output.
- Rugged UV resistant case with convenient carrying handle and molded wall mount hangers
- Circuit boards and transformer coated with special protectant to prevent damage from moisture and salt
- Designed for installation indoors or in protected enclosure.
- Accepts 20 through 9 ga wire
- 120 VAC powered
- Size: 8-1/2h X 13w X 8d
- Two-Year limited warranty (excludes storm damage and fuses)
- FREE Shipping on orders over $50
Specs for the XP-2 / XP-5 Charger
Dimensions: 13.5" X 8.25" X 8.0"
Weight: 7 lbs
Enclosure: Polycarbonate Thermoplastic
Input
110-120 VAC, 0.3A, 60 Hertz, 10 Watts
Output
Voltage: 6.7 KV - 10.0 KV Open Circuit
Amperage: @ 500 OHM Load: 9.0
Type of Output:
Intermittent Peak Discharge
Pulse on Time: 70-200 Microseconds
Off Time: 1.0-1.8 Seconds
Range:
Up to 30 Miles Under Ideal Conditions/Range varies due to load conditions
Stored Joules: 2.0
500 OHM Load Joules: 1.5
About the Professional Line of Fi-Shock Electric Fence Energizers
The new professional line of Fi-Shock electric fence energizers are engineered for reliable, high-performance use. The most obvious feature is the unique styling of the housing with a convenient pick-up-and-go handle. All Fi-Shock models have two output terminals - Full Power for large livestock and large farms and a Reduced Power terminal for small areas such as paddocks and for strip grazing. Both terminals can be operated on two different fence systems at the same time.
High-tensile wire fencing is the most significant improvement in farm fencing since the introduction of barbed wire in 1874. Although relatively new to the United States, high-tensile electric wire fences have been used to control cattle and sheep on the vast ranches of Australia and New Zealand for 50 years. High-tensile electrified shock fencing not only contains all types of livestock, it is an excellent deterrent, when electrified, for unwanted predators. It is more secure, looks neater and lasts longer, with less maintenance than either barbed wire or woven fence.
As an authorized dealer for Fi-Shock Inc., WirelessDogFenceDirect provides a complete line of high-tensile wire and accessories. Using either the installation manual or construction video (call to order) will make your life a great deal easier before, during, and after you install the electric fence line. Upon completion of your first installation, you will see that high-tensile fencing is truly, HORSE HIGH, HOG TIGHT AND BULL STRONG. Good fencing from all of us at WirelessDogFenceDirect and Fi-Shock !
- Low Cost: Due to the need for fewer line posts and the fact that you do not have to tie off at every corner as with barbed or woven wire, the cost per foot is substantially less than conventional fencing.
- Lasts Longer: High-tensile wire has a class 3 coating of zinc, which will not show red rust for up to 50 years in the Northern Hemisphere. All metal accessories used in the fence line carry a class 3 coating or are hot dipped galvanized to insure long life.
- Looks Good: High-tensile fencing is aesthetically pleasing, stronger than conventional fencing and will contain any breed of livestock.
- All solid state circuitry is specially coated to prevent damage from moisture and salt-laden air.
- The transformer is totally encapsulated in an epoxy resin for complete moisture protection.
- Built-in lightning protection helps reduce damage from power surges on the fence line due to lightning.
- Modular design using plug-in components allowing for quick and easy repairs.
- All models have a two-year limited warranty and all are made with pride in the USA.
INSTALLATION TIPS FOR THE CONSTRUCTION OF ELECTRIC AND NON-ELECTRIC HIGH-TENSILE FENCES
Your first step is to determine the type of high-tensile fence required, the fence design and whether to use an electric or a non-electric approach. A basic fence layout on paper will help you in establishing the post sizes, spacing, length of each run and type of brace assemblies. The fence designs listed in this manual should be helpful. Keep in mind though, your fence should be designed specifically for your particular containment needs.
WARNING - Wire, when over-stretched, may break and recoil causing serious injury. Caution is advised when working with any wire. Eye and hand protection should be worn when working with high-tensile wire.
Fi-Shock Electric Fence Model Chart
| Electric Fencing Reference Chart |
| Type of Energizers |
Model Numbers |
Effective on these Animals |
| Pet Energizer & Kits |
SS-2DX/2LGX, SS-725CS, SS-725RP, SS-440/SS-740, SS-750X, SS-750RPX, SS-2KX |
Dogs, Rabbits |
| Small Animal Energizers |
SS-2DX/2LGX, SS-725CS, SS-440/SS-740, SS-750X, SS-750RPX |
Raccoons, Rabbits, Skunks, Foxes, Opossums |
| Small Farms (clean fence) |
SS-440/SS-740, SS-505, SS-525, SS-550X |
Cows, Horses, Deer, Pigs, Goats |
| Large Farms w/ Medium Weeds |
SS-1000X, SS-2000X, SS-4000X, SS-9000X, |
Bulls, Cows, Horses, Deer, Pigs, Goats |
| Large Farms w/ Heavy Weeds |
XP-2, XP-5, XP-15 |
Bulls, Cows, Horses, Deer, Pigs, Goats, Sheep |